Sodium Chloride

SS0430-CAPS SS0441-500ML SS0440-1L SS0430-2.5KG SS0450-2.5KG SS0437-1L SS0430-2.5KGR SS0442-500ML SS0430-500GR SS0430-12KG SS0442-50ML SS0436-500ML SS0450-500G SS0430-735G
470302-502EA 7.3 USD
470302-502 470302-512 470302-522 470302-500 470302-506 470302-516 470302-504 470225-730 470225-796 470225-798 470302-494 470302-510 470302-498 470302-520
Sodium Chloride
Chemicals for Science Education
CAS Number: 7647-14-5
Formula: NaCl
Density: 2.16 g/mL
Boiling and Freezing Point: 1465°C, 801°C
Shelf Life: 36 Months

Note: The chemical specifications for some items on this product page may differ from the specifications listed above. For more information, consult the Safety Data Sheet or contact your Ward's representative.

Delivery information: This product is designed for educational and teaching laboratories, and no certificate of analysis is available.



   
 

ORDER

Disposal

This disposal method is published for your convenience. You MUST have checked with your federal, state, and local regulations before using this method and these methods are only applicable for small laboratory sized quantities.

The disposal of this chemical does not need pretreatment and it is not necessary for any chemical reaction to be conducted before it is disposed into a landfill or down the school drain. HOWEVER, there are numerous conditions that should be met which are outlined below before this can be discharged.

If the material is in the solid form, it can be buried in a landfill if:
 a. Local regulations have been confirmed that this material can be disposed of in a landfill.
 b. Chemical is packed into a cardboard box with an appropriate amount of packing material.
 c. Cardboard box is sealed with durable tape.

If the material is in an aqueous form, it can be poured down the drain with excess water if:
 a. Local and State regulations have been checked and you have verified that this material is suitable for this type of disposal
 b. The school drain is connected to the sanitary sewer system.
 c. The quantity that you are disposing of is minimal. A good rule of thumb is less than 250 mL.
 d. Combinations of chemicals are not going down the drain at the same time.
 e. A twenty-fold excess of water is used when washing the chemical down the drain.

A good resource to contact is the local wastewater treatment facility as they can give you guidance and be a resource on drain disposal.

Solution Prep

To prepare a solution, determine the formula weight of the material, the concentration (Molarity) of the solution, and the amount of solution desired in Liters. Once this information has been obtained, use the following formula:
(Formula Weight) x (Concentration) x (Desired Volume) = Number of grams in desired volume of liquid

For a 1 M, 1 L solution:
(Formula Weight) x (1 mol/L) x (1 L) = x g added to 1-L volumetric flask. Dilute to a final volume of 1 L with DI Water.

PRODUCT RESOURCES